Email:

HPx-250 Link Setting Tool

Select the appropriate signal characteristics for your radar and this tool will highlight which links should be set on the HPx-250 card.

Hover over a link to see its number. This tool is for guidance only and you should consult the HPx user manual too.

Video A
  • Impedance
  • 75 Ohm
  • High Z
Video B
  • Impedance
  • 75 Ohm
  • High Z
Trigger
  • Signal Type
  • Single-Ended
    • Impedance
    • 75 Ohm
    • High Z
    • Voltage
    • 3 to 9V
    • 6 to 25V
    • 12 to 55V
    • Program
  • Programmable threshold not recommended mode.
  • Differential (RS-422)
ACP
  • Signal Type
  • Single-Ended
    • Impedance
    • 75 Ohm
    • High Z
    • Voltage
    • 3 to 9V
    • 6 to 25V
    • 12 to 55V
    • Program
  • Programmable threshold not recommended mode.
  • Differential (RS-422)
ARP
  • Signal Type
  • Single-Ended
    • Impedance
    • 75 Ohm
    • High Z
    • Voltage
    • 3 to 9V
    • 6 to 25V
    • 12 to 55V
    • Program
  • Programmable threshold not recommended mode.
  • Differential (RS-422)
HPx links Links JP1 JP2 JP3 (Right) JP4 (Right) JP5 (Right) JP6 (Right) JP7 (Right) JP8 (Right) JP3 (Left) JP4 (Left) JP5 (Left) JP6 (Left) JP7 (Left) JP8 (Left) JP13 JP14 JP15 JP18 (Left) JP18 (Centre) JP18 (Right) JP21 (Left) JP21 (Centre) JP21 (Right) JP24 (Left) JP24 (Centre) JP24 (Right)